1.Detection distance: (Under the conditions of visibility ≥ 5 km and relative humidity ≤ 80%), it is ≥ 800 m (when the objective lens diameter of the sight is over 50 mm).
2.Directional accuracy : ≤0.5°.
3.Observation field of view (horizontal × vertical):≥7°×5°.
4.System startup time: 5s.
5.Detection field of view: 4°×3°
The photoelectric detection and jamming system is mainly used to search for and detect the azimuth and distance of targets using photoelectric sights (such as white - light/low - light scopes, telescopes, and laser rangefinders), and to conduct laser jamming. It can be used handheld or mounted.
1.It has the advantages of low - light detection imaging, laser ranging, laser detection, and laser jamming.
2.Spot diameterφ: Within the distance range of more than 50 m (excluding 50 m) to 1000 m, the spot diameter φ should be greater than or equal to 50 cm .
3.Spot density uniformity: ≥75%.
4.Discovery probability (automatic): ≥80% (when the detection distance is ≥300 m).
5.Daytime observation distance: (Under the conditions of visibility ≥ 5 km and non - transparent background), the recognition distance of a single standing person is ≥ 1.2 km.
6.Nighttime observation distance: (Under the conditions of illumination not higher than 5×10⁻³ Lx, visibility ≥ 5 km, non - transparent background and without active light supplementation), the observation distance for a single standing person is ≥ 300 m.
7.Jamming module: Power density : 0.5~1.25mW/cm2 .
1.Detection distance: (Under the conditions of visibility ≥ 5 km and relative humidity ≤ 80%), it is ≥ 800 m (when the objective lens diameter of the sight is over 50 mm).
2.Directional accuracy : ≤0.5°.
3.Observation field of view (horizontal × vertical):≥7°×5°.
4.System startup time: 5s.
5.Detection field of view: 4°×3°
6.Distance: 50 m to 1500 m (for vehicle targets); Accuracy: ±2 m.
7.Operating temperature: -20°C to +55°C. It has a low - voltage warning function, a battery reverse - connection protection function, and a power - on self - test function.
8.Power supply mode: Powered by 18650 batteries.
1.** Installation and Calibration**: The holographic sight should be correctly mounted on the firearm, and necessary calibration should be carried out to ensure aiming accuracy.
2.**Battery Management**: Regularly check and replace the batteries to avoid affecting the normal use of the sight due to insufficient gun sight power.
3.**Maintenance**: Keep the sight clean and dry, and avoid it from being affected by adverse factors such as impacts or vibrations.
4.**Operation Specifications**: When using the holographic sight, the operation specifications should be followed to ensure the safety of the shooter and the aiming accuracy.